Flashforge Dreamer custom spool stands

Hi all,

as it was pointed out in previous post we are discontinuing the 0.5kg spools. PLA and ABS is going to be on white spools and large black spools. Until we will fully migrate to large black spools.

Here is a custom spool holder for the Flashforge Dreamer. I haven’t had a chance to print it myself but since the large black spool fits inside the dreamer it should be ok for both – white and black spools.

2015-07-16 10.50.28 dreamer_bracket

http://www.thingiverse.com/thing:652415

Aurimas

Aurarum spool sizes

I think this is long overdue.

So we have 3 size spools:

Small black spool. In general it holds 0.5kg/spool. We used to make PLA and ABS on them. Going forward only exotic materials (such as TPE, Nylon and other) will be on these spools.

 

 

small spool

 

Our standard spool size at this stage. Holds 1kg of filament. Used mostly for 1.75mm ABS and PLA. We still have some 3mm filament remaining on these spools. In the future once our stock of these spools is depleted we are going to move to large spools.

white spool

Large black spools. All our new 3mm filament production is going to be on new spools. These spools hold 0.9kg/spool. we have some 1.75mm PLA and ABS on these spools already as well. If someone wants to get these spools rather than the small can ask it during the order.

big spool

 

Hope it all explains everything.

 

Regards,

Aurimas

Flashforge Pro custom brackets

Hi All,

I thought some of you would be looking how to use our spools on the Flashforge Pro.

The issue is that the 2015 Pro uses 54mm brackets and even our big spools don’t fit on them.

So I thought I will make a design for replacement bracket. Actually two versions of it – one 32mm (our white spools) and the 52mm (our big black spools).

Please feel free to provide any feedback and/or changes modifications required.

The files are in attachment

 

Regards,

Aurimas